Dalea Floating Lowboard · Oak Decor – 4 Modules

Overall width: 35–115 cm · Depth: 35–50 cm · Height: 15–50 cm.

Overall width: 60–175 cm · Depth: 35–50 cm · Height: 15–50 cm.

Overall width: 115–228 cm · Depth: 35–50 cm · Height: 15–50 cm.

Overall width: 175–285 cm · Depth: 35–50 cm · Height: 15–50 cm.

Overall width: 228–285 cm · Depth: 35–50 cm · Height: 15–50 cm.

Overall width: 286–350 cm · Depth: 35–50 cm · Height: 15–50 cm.

Two equal-width bodies: 143–175 cm each. Total width is selected in 1 cm increments; an odd total width gives half-centimetre widths for each body.

Dalea is made to order in Spain in approximately four weeks. Transit normally takes around one additional week. Delivery is free on orders over €99 and every shipment is insured. These times are estimates rather than guaranteed delivery dates.

You have 90 calendar days from delivery to request a return.

As Dalea is made to your chosen dimensions, it must be unused, uninstalled and returned in its original packaging with all components. Return shipping or collection costs are not included and may be deducted from the refund.

If your order arrives damaged, please let us know within 5 calendar days of delivery and keep the original packaging so we can assess the incident.

Read the full Made to Measure return policy

Dalea is covered by a five-year warranty, with specialised assistance whenever you need it.

Standard configurations with one to five modules arrive as one fully assembled body. Dalea XL arrives as two fully assembled, equal-width bodies, each with two modules. Secure each body to the wall using the included hidden rear fittings and wall support, then level and align them side by side. Small standard configurations can be installed by one person; larger configurations require two people.

Brick or concrete walls are recommended with the included fittings. Plasterboard requires suitable specialist fixings, which are not included, and supports considerably less load. Standard configurations used as a desk or dressing table must be secured to both a rear wall and an adjoining side wall; both fittings are included. For Dalea XL, each of the two bodies must be fixed, levelled and aligned on the wall.

Dalea is protected for transport in its assembled form: one body for standard configurations, or two bodies for XL. Keep the original packaging and all components if you may need to use the 90-day return policy.

Dalea adapts to different rooms and uses, from a floating bedside table, wall shelf or console to a desk, dressing table, TV unit or sideboard. Choose a standard configuration with one to five modules, or four modules XL for a wider TV and storage composition.

Standard configurations have one to five equal-width modules. Available overall widths are 35–115 cm for one, 60–175 cm for two, 115–228 cm for three, 175–285 cm for four and 228–285 cm for five.

Dalea XL has four modules and an overall width of 286–350 cm. It is made as two equal-width bodies, each measuring 143–175 cm. Total width is selected in 1 cm increments; an odd total width gives half-centimetre widths for each body.

All configurations can be 35–50 cm deep and 15–50 cm high.

Each equal-width module can be left open at the front or fitted with a full-extension, soft-close drawer. Drawer fronts are available in smooth or vertically grooved designs across all four finishes.

Dalea has a high-density fibreboard core and comes in four finishes: Natural Oak and Natural Walnut use real wood veneer protected with a clear matt varnish, while Oak Decor and Walnut Decor use a synthetic wood-effect finish.

Yes. Standard configurations with one to five modules arrive as one fully assembled body. Dalea XL arrives as two fully assembled, equal-width bodies, each with two modules. Hidden rear fittings and wall supports are included. Each XL body must be secured, levelled and aligned side by side on the wall. Small standard configurations may be installed by one person; larger configurations require two people.

On XL, the tops and raised outer border align to create a continuous visual line, with a fine central joint visible. In Natural Oak and Natural Walnut, we select the veneers to match as closely as possible, although slight differences in tone and grain may remain.

Solid brick or concrete walls are recommended with the included fittings. Plasterboard requires suitable specialist fixings, which are not included, and an installer should assess the wall before fitting because its supported load will be considerably lower.

Standard configurations with one to five modules can be used as a desk or dressing table. Any configuration used for seated work must be installed against two walls and mechanically secured to both the rear wall and an adjoining side wall; both mounting fittings are included. Dalea XL is designed as a TV and storage composition.

The following figures apply only to standard configurations with one to five modules; they are not an XL load rating.

The recommended usable load applies to the complete piece, assumes a static and evenly distributed load, and requires correct installation on brick or concrete with the included fittings: 15 kg for one- or two-module configurations 15–20 cm high; 20 kg for one- or two-module configurations over 20 cm and up to 50 cm high; 30 kg for three- to five-module configurations under 40 cm high; and 40 kg for three- to five-module configurations 40–50 cm high. Capacity also depends on width, depth, wall type, installation and load distribution. Plasterboard supports considerably less.

For Dalea XL, contact us to confirm the supported load for your dimensions and wall type before installation.

Dalea is made to order in approximately four weeks, followed by around one week in transit. You have 90 calendar days from delivery to request a return. The piece must be unused, uninstalled and returned in its original packaging with all components. Return shipping or collection costs are not included.

If selected, the LED lighting comes installed beneath the unit, with a capacitive touch switch concealed beneath the top. To turn the light on or off, touch the top surface at the rear corner on your chosen side.

Choose the switch position on the left or right, as viewed from the front, in the configurator. The LED transformer and the included underside cable opening are placed on that same side.

Includes a 2 m power cable with a Schuko plug. The cable can exit underneath to connect to a socket below the unit, or remain inside and connect to a wall socket through the optional rear socket-access opening.

For Dalea XL, one shared LED system and a single switch serve the whole composition.

Selecting the optional 15 mm-wide cable slot at the rear of the top includes a discreet underside opening as standard, so cables can pass from top to bottom or vice versa. All internal side panels have cable slots, allowing cables to pass between compartments even when they have drawers.

The optional rear socket-access opening stays concealed: the drawer hides it in compartments with a drawer, and a cover is included for open compartments to keep the cables out of sight.

On Dalea XL, the optional 15 mm-wide rear cable slot is included in both bodies when selected. Rear socket access can be placed in module 1, 2, 3 or 4, numbered from left to right as viewed from the front.

We are proud to be part of a new generation of brands that see transparency as the basis of trust between a company and its customers.

Below, you can see how our prices are broken down and understand what lies behind each Woodendot product you take home.

These cost breakdowns are calculated as an average across all Woodendot collections.

We follow a fair and transparent margin policy that allows us to offer reasonable prices. When a product is on sale, the discount comes from our margin.

This is our gross margin: the share of each sale that supports the day-to-day operation and long-term development of Woodendot.

This revenue helps us cover:

Salaries: supporting the growing team that makes Woodendot possible.
Product development: researching, designing and developing new products for our collections.
Marketing and communication: advertising, social media, email and the content that helps customers discover and understand our products.
Rent and services: maintaining our office, warehouse and day-to-day facilities.
Technology: computers, software and the digital tools required to operate the business.
Professional and company fees: legal, accounting and administrative costs required to run the company.

We carefully select our materials from responsible sources, including FSC-certified wood from responsibly managed forests.

Our products are made locally in and around Íscar, Spain, by experienced craftspeople with a deep knowledge of woodworking.

This approach increases our production costs, but it allows us to maintain the quality we expect from every piece while supporting local production and more responsible material choices.

Woodendot is a Spanish company and pays its taxes in Spain. This percentage represents the average share of each sale that we collect and pay in taxes and statutory fees.

This is the average cost of shipping our products, including insured delivery to protect your order in the event of damage during transit.

Every product is checked and carefully prepared before being packed. Where applicable, pieces are also pre-assembled to make the final setup easier at home.

This percentage covers the preparation process and the protective packaging required to keep each product secure during transport.

Most of our packaging is made from recycled materials and can be recycled after use, with very little plastic.

This is the average fee charged by the payment providers integrated into our online store for processing each transaction.

As part of our Design with Intention philosophy, we plant one tree for every product sold.

Over the years, this commitment has helped us plant thousands of trees.

Learn about our tree-planting programme